Skip to content

Ichiro

Ichiro Offset Cutting Scissors

$229.95

$329.00

In stock

Length: 6.0″

Size help

Free standard shipping over A$89 · usually dispatched in 1–2 business days

A 440C sword-profile cutter in five sizes, 5.0 to 7.0 inches. Pick a shorter blade for detail or a longer one for scissor-over-comb.

At a glance: 5.0–7.0″ · Right-handed · Offset handle · Sword Blade edge · 440C Steel

Specifications
Steel440C Steel
HandleOffset
Sizes5.0″ to 7.0″
HandRight
Care

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

Specifications

Maker Ichiro
Hand right-handed
Lengths 5.0″, 5.5″, 6.0″, 6.5″, 7.0″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Edge Sword bladeA sword blade is a blade shape with a long, straight spine and edge and a slight curve near the tip.Read more in the glossary Sword Blade
Steel 440C440C is a high-carbon stainless steel and the working standard for barber scissors.Read more in the glossary 440C Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 58-60HRC
Listed length 5.0", 5.5", 6.0", 6.5" and 7.0" Inches
Origin From Japan
SKU ICH-OFF-C60

Description

Description

The Ichiro Offset is one sword-blade cutter in five lengths, for barbers who want a single main shear from detail through to long scissor-over-comb.

  • Lengths: 5.0″, 5.5″, 6.0″, 6.5″ or 7.0″
  • Blade: sword profile
  • Steel: 440C at 58-60 HRC
  • Handle: right-handed offset, with the thumb ring sitting lower than the finger ring

The sword profile keeps a straight, firm line along the blade for blunt cutting and over-comb work. 5.0″ is a compact blade for detail around the ears and neckline; 6.0″ and 6.5″ suit general barbering; 7.0″ gives the reach for scissor-over-comb on flat-tops and longer tops. Choose the length you already work comfortably with, and use the size guide to measure it.

The trade-off is that this is one tool with one job. It shapes; it does not blend. The Ichiro Offset thinner and 16-tooth texturiser are separate, or buy the cutter with a 6.0″ thinner in the Offset set.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Questions

What lengths are there?

5.0″, 5.5″, 6.0″, 6.5″ or 7.0″.

What steel and blade?

440C steel at 58-60 HRC with a sword-profile blade and right-handed offset handle.

Is a thinner included?

No. The Offset thinner and 16-tooth texturiser are separate, or choose the Offset set.

How do I pick the right length?

Measure a shear you already cut with from the blade tip to the end of the finger ring and start there. Shorter lengths suit detail around the ears and neckline; longer lengths give reach for scissor-over-comb. The size guide walks through it.

How fast is delivery in Australia?

Checkout shows handling of 1 to 2 business days and arrival in 2 to 4 days. Standard shipping is A$6 and free over A$89; express is A$9.95. Full details are on the shipping page.

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like

Size help

Ichiro Offset Cutting Scissors · 5.0″, 5.5″, 6.0″, 6.5″, 7.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check