Skip to content

Juntetsu

Juntetsu VG10 Chomper 16-Teeth Texturizing Scissors

$259.95

$349.00

In stock

Free standard shipping over A$89 · usually dispatched in 1–2 business days

A 6.0-inch VG10 Chomper with 16 teeth for defined texture and stronger weight removal.

At a glance: 6.0″ · Right-handed · Offset handle · 16 Teeth edge · VG10 Steel

Specifications
SteelVG10 Steel
HandleOffset
Sizes6.0″
HandRight
Teeth16

Thinner facts

Teeth
16
Tooth form
V-Shaped Teeth

Tooth count is not cut rate. Thinners with the same tooth count can take out very different amounts, so we don't guess. Test on a hidden section first.

Care

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

Specifications

Maker Juntetsu
Hand right-handed
Length 6.0″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Edge 16 Teeth
Steel VG10 Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 60-62HRC
Listed length 6.0" Inches
Country of origin Japan
SKU JUN-CHMP-T16

Description

Description

The Juntetsu Chomper 16 is a 6.0″ texturiser for taking weight out of dense sections and adding defined texture. It sits in the middle of the Chomper range, between the 10-tooth and 21-tooth versions.

  • Teeth: 16, wide-set
  • Length: 6.0″
  • Steel: VG10 at 60-62 HRC
  • Handle: right-handed offset, with the thumb ring below the finger ring

The Chomper 16 has 16 widely spaced teeth. That makes it a tool for movement in crops and thick tops, and for breaking up heavy weight before you finish.

Work in small sections. Take a few passes, comb through and check before taking more, because chunks are easier to add than to hide.

The trade-off is the finish. A 16-tooth chomper does not soften a clipper line like a 30-tooth thinner does, so keep a blender for that step. If you want a different tooth count, the Chomper 10-tooth is the lower-count option.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Questions

What does a 16-tooth chomper do?

It takes out weight and adds defined texture. It sits between the 10-tooth and 21-tooth Chompers.

What size and steel?

6.0″, VG10 steel at 60-62 HRC, right-handed with an offset handle.

How should I use it?

Start with a few passes in a dense section, comb through and check before taking more.

How do I look after a thinner?

Brush hair out of the teeth after each client, wipe the blades dry and add a drop of oil at the pivot at the end of the day. Store it closed in a case. The care guide covers tension and sharpening.

How fast is delivery in Australia?

Checkout shows handling of 1 to 2 business days and arrival in 2 to 4 days. Standard shipping is A$6 and free over A$89; express is A$9.95. Full details are on the shipping page.

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like