Skip to content

Juntetsu

Juntetsu Obsidian MIKURO EDGE Professional Scissors Set

$524.95

$649.00

Pre-order: ask us

Pre-order: ask us

This one is out of stock. Similar shear sets in stock are below, or ask us about a pre-order.

Lengths: 5.5″ cutter · 6.0″ cutter · 6.5″ cutter

Pre-order: ask us

Similar in stock

Juntetsu Obsidian MIKURO EDGE set: a micro-channel cutter and a 30-tooth thinner in Takefu VG10 steel at 60-62 HRC, super-offset handles, matte black finish. Cutter 5.5" to 6.5", 6.0" thinner.

At a glance: 5.5, 6.0, 6.5″ · Right-handed · Offset handle · Japanese Takefu VG10 Super Steel

Specifications
SteelJapanese Takefu VG10 Super Steel
HandleOffset
Sizes5.5″, 6.0″, 6.5″
HandRight

Thinner facts

Tooth count is not cut rate. Thinners with the same tooth count can take out very different amounts, so we don't guess. Test on a hidden section first.

In the box and care

What's in the box

  • 1 × cutting scissor in your chosen length: 5.5″, 6.0″ or 6.5″
  • 1 × 6.0″ thinning scissor, 30 V-shaped teeth

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

Specifications

Maker Juntetsu
Tool Shear Sets
Hand right-handed
Lengths 5.5″, 6.0″, 6.5″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Steel Japanese Takefu VG10 Super Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 60-62 HRC
Country of origin Japan
SKU JUN-OBX-S55

Description

Description

The Obsidian set puts a MIKURO EDGE cutter and its matching thinner under one black finish: micro-grooved blades in Takefu VG10, on the same super-offset handle, so switching changes the job, not the grip. Juntetsu is an independent Japanese scissors maker; right-handed.

Micro-Channel Blades

The MIKURO EDGE channels run along the blade faces: Juntetsu’s grip device, intended to hold the section during slide and wet work rather than skimming it. A design feature, stated plainly. The 6.0” thinner carries 30 V-shaped teeth under the same treatment.

Steel And Finish

Japanese Takefu VG10 Super Steel at 60-62 HRC on both tools. The matte black is a finish, not armour: a sharpening removes it at the edge line. Book a professional shear service when the cut starts to drag.

Sizes

Cutter in 5.5” (detail), 6.0” (general) and 6.5” (long strokes, scissor-over-comb); thinner fixed at 6.0”. The size guide works it through.

What To Expect

The grooves and the black are the whole point: if you want the same steel without the theatre, plain VG10 cutters and sets run through the Juntetsu range. Wipe both after a session, keep the thinner’s teeth clear, oil the pivots.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like