Skip to content

Mina

Mina Ash Black Thinning Scissors

$134.95

$174.95

In stock

Free standard shipping over A$89 · usually dispatched in 1–2 business days

Mina Ash Black is a 6.0-inch V-tooth thinner for barber blending in a black offset handle.

At a glance: 6.0″ · Right-handed · Offset handle · Thinning/Texturizing edge · SUS440C Steel

Specifications
SteelStainless Alloy (SUS440C) Steel
HandleOffset
Sizes6.0″
HandRight
Weight42 g per piece

Thinner facts

Tooth form
V Teeth Serration
Weight
42 g per piece

Tooth count is not cut rate. Thinners with the same tooth count can take out very different amounts, so we don't guess. Test on a hidden section first.

Care

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

Specifications

Maker Mina
Hand right-handed
Length 6.0″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Edge Thinning/Texturizing
Steel SUS440C Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 58 HRC
Listed length 6" Inches
SKU MIN-ASH-T60

Description

Description

The Mina Ash Black thinner is the blending half of the Ash range, sold on its own. Use it to take weight from thick sections and soften a line after the cut.

  • Length: 6.0″
  • Teeth: V-shaped
  • Steel: SUS440C at 58 HRC
  • Handle: right-handed offset, with the thumb ring below the finger ring
  • Finish: black

V-shaped teeth hold the hair as the blades close, so each pass removes a share of the section rather than cutting a line. That makes it a finishing tool: shape with the cutter first, then use light passes and comb through before deciding where more weight needs to go.

The offset handle and black finish match the Ash Black cutter, so the two shears feel the same in the hand when you switch.

The trade-off is that a blending thinner does not give chunky texture. For bold movement in a crop, a texturiser is the better tool. To match it with a cutter, add the Ash Black cutter or buy both in the Ash Black set.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Questions

What size is it?

6.0″ with V-shaped teeth, right-handed with an offset handle.

What steel is it?

SUS440C steel at 58 HRC with a black finish.

Is there a matching cutter?

Yes. Pair it with the Ash Black cutter or buy both in the Ash Black set.

How do I look after a thinner?

Brush hair out of the teeth after each client, wipe the blades dry and add a drop of oil at the pivot at the end of the day. Store it closed in a case. The care guide covers tension and sharpening.

How fast is delivery in Australia?

Checkout shows handling of 1 to 2 business days and arrival in 2 to 4 days. Standard shipping is A$6 and free over A$89; express is A$9.95. Full details are on the shipping page.

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like