Skip to content

Mina

Mina Black Diamond Cutting Scissors

$129.95

In stock

Length: 6.0″ cutter

Size help

Free standard shipping over A$89 · usually dispatched in 1–2 business days

Black Diamond offset cutter with a flat-bevel blade and dark finish.

At a glance: 5.5, 6.0″ · Right-handed · Offset handle · Flat Bevel Edge · SUS440C Steel

Specifications
SteelResilient Stainless Alloy (SUS440C) Steel
HandleOffset
Sizes5.5″, 6.0″
HandRight
Weight42 g per piece
Care

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

A length you want is out of stock? Pre-order: ask us

Specifications

Maker Mina
Hand right-handed
Lengths 5.5″, 6.0″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Edge Flat Bevel Edge
Steel SUS440C Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 58 HRC
Listed length 5.5" & 6.0" Inches
SKU MIN-BDMD-C60

Description

Description

The Mina Black Diamond is a single cutting shear for blunt lines and controlled barber sections, with a flat bevel edge and a black coating.

  • Lengths: 5.5″ or 6.0″
  • Edge: flat bevel
  • Steel: SUS440C at 58 HRC
  • Handle: right-handed offset, with the thumb ring below the finger ring

A bevel edge holds the hair as the blades close, so sections stay put for blunt cutting and scissor-over-comb. Choose 5.5″ for detail and short sections or 6.0″ as an all-round length. If you are unsure, measure a shear you already use with the size guide.

The black coating is the look; the working choices are the edge, the length and the offset handle.

The trade-off is the edge type. A flat bevel does not slide through a section like a convex edge, so it is the wrong pick if slide cutting is your main technique. This is the single cutter. For a matching thinner, the Black Diamond kit adds a 6.0″ thinner with every cutter length.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Questions

What lengths are there?

5.5″ or 6.0″, whole-shear length.

What steel and edge?

SUS440C steel at 58 HRC with a flat bevel edge and black coating. Right-handed offset handle.

Is there a matching thinner?

Yes. The Black Diamond kit adds a 6.0″ thinner.

How do I pick the right length?

Measure a shear you already cut with from the blade tip to the end of the finger ring and start there. Shorter lengths suit detail around the ears and neckline; longer lengths give reach for scissor-over-comb. The size guide walks through it.

How fast is delivery in Australia?

Checkout shows handling of 1 to 2 business days and arrival in 2 to 4 days. Standard shipping is A$6 and free over A$89; express is A$9.95. Full details are on the shipping page.

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like

Size help

Mina Black Diamond Cutting Scissors · 5.5″, 6.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check