Skip to content

Mina

Mina Sakura II Hair Cutting Scissors

$129.95

$219.00

In stock

Length: 6.0″

Size help

Free standard shipping over A$89 · usually dispatched in 1–2 business days

Mina Sakura II is an engraved offset cutter in five lengths from 5.0 to 7.0 inches for barber detail and comb work.

At a glance: 5.0–7.0″ · Right-handed · Offset handle · Convex Edge · SUS440C Steel

Specifications
SteelPremium SUS440C Shear Steel
HandleOffset
Sizes5.0″ to 7.0″
HandRight
Weight42 g
Care

Care

Keep the blades clean, the pivot moving freely and the edge away from hard surfaces between clients. Read the care guide

Specifications

Maker Mina
Hand right-handed
Lengths 5.0″, 5.5″, 6.0″, 6.5″, 7.0″
Handle Offset handleAn offset handle has a thumb shank shorter than the finger shank, so the thumb ring sits closer to the pivot and slightly forward of the finger ring.Read more in the glossary Offset
Edge Convex edgeA convex edge curves smoothly from the spine to a very fine edge with no flat facet, so it slices rather than chops.Read more in the glossary Convex Edge
Steel SUS440C Steel
Hardness (HRC) HRCHRC is hardness on the Rockwell C scale, measured by pressing a diamond point into the steel under a set load.Read more in the glossary 58 HRC
SKU MIN-SAK-C60

Description

Mina Sakura II is a convex cutter in five lengths, 5.0″ to 7.0″, on one engraved blade. Buy 5.0″ or 5.5″ for detail round the ears and neckline, 6.0″ as the daily length and 6.5″ or 7.0″ for scissor over comb.

  • Lengths: 5.0″, 5.5″, 6.0″, 6.5″ or 7.0″
  • Edge: convex, with an engraved blade
  • Steel: SUS440C at 58 HRC
  • Handle: right-handed offset, with the thumb ring below the finger ring

Against the Black Diamond: the Black Diamond has a flat bevel, which holds a section for blunt cutting but does not slide through hair like a convex edge. Pick the Sakura II if slide and point cutting are part of your day.

The trade-off is one tool with one job. It shapes the cut; it does not blend. The Sakura II set adds a 6.0″ 30-tooth thinner. If you are unsure of the length, measure the pair you cut with using the size guide.

Shipping & Returns

Shipping

Standard shipping is A$6, and free on orders over A$89; express is A$9.95. Online checkout delivers within Australia.

View full shipping policy →

Returns

Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.

View full returns policy →

Ordering details

Questions

What lengths does the Sakura II cutter come in?

Five: 5.0″, 5.5″, 6.0″, 6.5″ and 7.0″, measured as whole-shear length. 5.0″ and 5.5″ suit close detail, 6.0″ is a daily middle length, and 6.5″ to 7.0″ give more reach over the comb.

Is it right or left-handed?

Right-handed, with an offset handle that sits the thumb ring lower than the finger ring.

What steel and edge does it use?

SUS440C steel at 58 HRC with a convex edge and an engraved blade finish.

Is there a matching thinner?

Yes. The Sakura II set pairs this cutter with a 6.0″ 30-tooth thinner.

How fast is delivery in Australia?

Checkout shows handling of 1 to 2 business days and arrival in 2 to 4 days. Standard shipping is A$6 and free over A$89; express is A$9.95. Full details are on the shipping page.

Check the fit. Keep it working.

General shear guidance to read alongside this model’s size, handle and care details.

You might also like

Size help

Mina Sakura II Hair Cutting Scissors · 5.0″, 5.5″, 6.0″, 6.5″, 7.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check