Skip to content

Choosing Your First Barber Shears

A student combing a section on a training mannequin, with a closed shear on a mat.
A student sectioning a training head, with a closed shear on the mat.

Choose for the work you’re learning

Get your course or shop tool list first; some providers supply part of the kit. Then buy one cutter you can control, usually a 5.5″ or 6.0″ offset in your cutting hand.

Left-handed? Buy a true left-handed pair; the left-handed guide explains why.

Check the delivery before first use

  1. Have the order confirmation beside the parcel. Use the option on the confirmation, not the gallery photo.
  2. Keep the packaging, inserts and paperwork together while you check.
  3. Match model, hand and length on each tool’s label to the order.
  4. Count every item in a set: cutter, thinner and any stated accessory.
  5. Look for visible damage such as a nick or bent tip, keeping fingers off the edges. Photograph anything unexpected.
  6. Keep the care and adjustment instructions with the tool.

Don’t cut hair, paper or anything else to test a concern, and don’t sharpen, take apart or keep adjusting a new pair. Contact us with your order number, what you ordered, what arrived and a photo. Faults and wrong items are handled under the warranty process and the Australian Consumer Law.

Before the first client

Run the drop test from the tension guide and leave the screw alone if it passes. Jaguar, for one, sets and tests its scissors at the factory. Take a new pair to your trainer for supervised practice; the holding guide covers grip.

Look after it from day one

Wipe dry after every client, oil the pivot at close and store it closed in a case. The maintenance guide covers the routine, and the apprentice mistakes guide lists the habits that cost apprentices an edge.

The blank arrival record (PDF) keeps the check with your receipt. More first-pair answers are in the apprentice FAQ, and the glossary of barber scissor terms explains the words on a listing.

Questions

What should my first pair of barber scissors be?

A 5.5″ or 6.0″ offset cutter in your cutting hand. It covers point cutting, clipper-over-comb finishing and detail. Add a thinner and a longer cutter later. See the apprentice picks.

What should I check when my new scissors arrive?

Match the model, hand and length on the label to your order confirmation, count every tool and accessory in a set, look for visible damage and keep the instructions and packaging. Do this before cutting any hair.

Do new scissors need adjusting before use?

Usually not. Jaguar, for example, says its scissors are adjusted and tested at the factory and need no immediate readjustment. Run the drop test, and only adjust if the pair clearly fails it.

What if the wrong size or hand arrives?

Don't use it. Contact us with your order number, what you ordered and what the label says, plus a photo. We'll sort out the next step.

Can I try new scissors on hair and return them if they don't suit?

No. Shears used or tested on hair can't be returned for change of mind. Check the fit by holding them and opening and closing them, and keep the packaging until you're sure. See returns.